Pages: [1]   Go Down
Author Topic: Installation and usage of Guymager a quick view  (Read 8682 times)
babloo
RegMem
*

Karma: +1/-1
Offline Offline

Posts: 22



WWW
« on: June 18, 2011, 05:57:55 PM »

Guymager

   Guymager is a forensics tool used for imaging a disk / memory card.

Profits to the user
   User friendly
   Fast and multi-threaded data compression
   Extended information to the image file

About Guymager

  Guymager is a Qt-based forensic imager. It is capable of producing image files in EWF and dd format.

       The internal structure is based on separate threads for reading, MD5 Calculation, writing and includes a parallelized compression engine, Thus making full usage of multi-processor and hyper-threading machines. Guymager should be run with root privileges, as other users do not have access to physical devices normally.

   
Configuration   

Guymager mainly works with two configuration files:

/etc/guymager/guymager.cfg  The main configuration file

/etc/guymager/local.cfg   The parameters adjusted here have precedence over guymager.cfg.

Description

 The GUI of Guymager, It is divided in to two sections, Section one Shows your disks connected to your machine, you can connect your storage devices even after you launch the program by clicking on rescan at the top we can view the disks attached. Each disk is represented with its serial number and model,

   Second section discloses with the information of the selected partition with MD5 hash value.
   
   By right clicking on a selected partition provides you with operations like Acquire and Info, Selecting the info will be provided by a dialog window with detailed info of the selected partition you can observe the commands executed in the window to retrieve the details.
   
   By selecting Acquire, you are asked for the image acquisition parameters after giving the related parameters click on ok it will start Data acquisition which is shown in the state tab from the GUI and it is indicated with the progress of process.

   The default settings can be reverted from the default configuration file by accessing it from
Vim.tiny /etc/Guymager/Guymager.cfg .
« Last Edit: July 13, 2011, 02:13:54 AM by babloo »Logged

babloo


Author Topic: Installation and usage of Guymager a quick view(Read 8682 times)
Sonnydayna
Member
*

Karma: +0/-0
Offline Offline

Posts: 2


« Reply #1 on: June 22, 2015, 01:35:50 AM »

but hard to find a way out.
Logged



Author Topic: Installation and usage of Guymager a quick view(Read 8682 times)
Onidrillza
Member
*

Karma: +0/-0
Offline Offline

Posts: 2


« Reply #2 on: August 10, 2015, 06:39:32 AM »

All information has been read, I think it would be very useful.
Logged



Author Topic: Installation and usage of Guymager a quick view(Read 8682 times)
Aomeonbaby
Member
*

Karma: +0/-0
Offline Offline

Posts: 2


« Reply #3 on: February 17, 2016, 02:00:26 AM »

The data is read And I will bring it to good use.
Logged


Author Topic: Installation and usage of Guymager a quick view(Read 8682 times)
Somsak
Member
*

Karma: +0/-0
Offline Offline

Posts: 3


« Reply #4 on: March 21, 2017, 03:46:36 AM »

Oh, it's a great way to understand it easily.
Logged


Pages: [1]   Go Up
Print
Jump to: